Jump to content

Adapter

From Wikipedia, the free encyclopedia
(Redirected from Travel adapter)
This mains power plug travel adapter allows British plugs to be connected to American or Australian sockets.

An adapter or adaptor[1] is a device that converts attributes of one electrical device or system to those of an otherwise incompatible device or system. Some modify power or signal attributes, while others merely adapt the physical form of one connector to another.

Travel adapters

[edit]

Many countries with ties to Europe use 230-volt, 50 Hz AC mains electricity, using a variety of power plugs and sockets. Difficulty arises when moving an electrical device between countries that use different sockets. A passive electric power adapter, sometimes called a travel plug or travel adapter, allows using a plug from one region with a foreign socket. As other countries supply 120-volt, 60 Hz AC, using a travel adapter in a country with a different supply poses a safety hazard if the connected device does not support both input voltages.

AC-to-DC adapters

[edit]
A "power cube"-type AC adapter

An AC-to-DC power supply adapts electricity from household mains voltage (either 120 or 230 volts AC) to low-voltage DC suitable for powering consumer electronics. Small, detached power supplies for consumer electronics are called AC adapters, or variously power bricks, wall warts, or chargers.

Computer adapters

[edit]

A host controller connects a computer to a peripheral device, such as a storage device, network, or human interface device. As a host controller can also be viewed as bridging the protocols used on the buses between peripheral and computer, and internally to the computer, it is also called a host bus adapter. Likewise, specific types may be called adapters: a network interface controller may be called a network adapter, and a graphics card a display adapter.

Adapters (often in the form of dongles) allow connecting a peripheral device with one plug to a different jack on the computer. They are often used to connect modern devices to a legacy port on an old system, or old devices to a modern port. Such adapters may be entirely passive, or contain active circuitry.

A common type is a USB adapter.

One kind of serial port adapter enables connections between 25-contact and nine-contact connectors,[2] but does not affect electrical power- and signalling-related attributes.

HDMI Adapter

[edit]

HDMI is backward compatible with the single-channel digital video interface (DVI-D or DVI-I, but not DVI-A or dual-channel DVI).[3][4] When using an adapter or an asymmetric cable, no signal conversion is required, so video quality is not lost.[5] “This means that DVI can be connected to an HDMI input using an adapter. DVI was an important step forward, introducing digital video. But it did not transmit audio. A separate cable to the audio output on the computer or sound card was required for that.[6] Any DVI-HDMI adapter can function as an HDMI-DVI adapter (and vice versa).[7][8] Usually, the only limitation is the gender of the adapter connectors, as well as the gender of cables and connectors with which it is used.

Features characteristic of HDMI, such as remote control and audio transmission, are not available on devices using the legacy DVI-D signal. However, many devices output HDMI via a DVI connector (for example, ATI 3000 series and NVIDIA GTX 200 graphics cards), and some multimedia displays can accept HDMI (including audio) through a DVI input. The exact capabilities beyond basic compatibility may vary. Adapters are generally bidirectional.

Adapters and active converters are also available for connecting HDMI to other video interfaces, including older analog formats as well as digital formats such as DisplayPort. Introduced in the 2000s, DisplayPort was designed to replace older standards such as VGA, DVI, and FPD-Link. Although it is not directly compatible with these formats, adapters are available for connecting to HDMI, DVI, VGA, and other interfaces.[9] There are USB-CEC adapters that allow a computer to control devices supporting CEC.

Software adapters

[edit]

In software, an adapter is a piece of code that complies with an interface of an existing component while actually using another implementation.

See also

[edit]

References

[edit]
  1. ^ Both spellings are used in both British and American English."Macmillan English Dictionary". Macmillan Publishers Limited. 2010. Retrieved 2010-04-14. adapter noun [countable] /əˈdæptə(r)/ or adaptor an object that allows you to connect two pieces of equipment of different types or sizes a. British an object that allows you to connect several pieces of electrical equipment to one electricity supply b. an object that allows you to use electrical equipment in countries where there is a different type of electricity supply from your own
  2. ^ Andrews, Jean (2007). A+ guide to managing and maintaining your PC (6th ed.). Boston, Mass.: Thomson Course Technology. p. 395. ISBN 978-0-619-21758-7. serial port adapter 25 9.
  3. ^ "DVI Information". dvihdmicables.com. Retrieved 2025-07-31.
  4. ^ "HDMI vs DVI: Which Is Better for Your Display Needs?". www.cablematters.com. Retrieved 2025-07-31.
  5. ^ "Video adapters explained". eaton.com. Retrieved 2025-07-31.
  6. ^ "HDMI 1.4 Vs 2.0 Vs 2.1: Which One Should You Choose?". www.geekom.co.uk. Retrieved 2025-07-31.
  7. ^ "DisplayPort to HDMI conversion: active vs passive adapter?". www.barco.com. Retrieved 2025-07-31.
  8. ^ "All About DVI". www.datapro.net. Retrieved 2025-07-31.
  9. ^ "DisplayPort…the End of an Era, but Beginning of a New Age". www.hopeindustrial.com. Retrieved 2025-07-31.