Fundamental resolution equation
The fundamental resolution equation is used in chromatography to help relate adjustable chromatographic parameters to resolution. a
Equation
[edit]
where,
= Number of theoretical plates
= Selectivity Term =
The term is the column factor, the term is the thermodynamic factor, and the term is the retention factor. The 3 factors are not completely independent, but can be treated as such.
Intervention
[edit]To increase resolution of two peaks on a chromatogram, one of the three terms of the equation need to be modified.
- N can be increased by lengthening the column (least effective, as doubling the column will get a or 1.44x increase in resolution).
- Increasing also helps. This can be done by lowering the column temperature in G.C., or by choosing a weaker mobile phase in L.C. (moderately effective)
- Changing α is the most effective way of increasing resolution. This can be done by choosing a stationary phase that has a greater difference between and . It can also be done in L.C. by using pH to invoke secondary equilibria (if applicable).
Resolution
[edit]The fundamental resolution equation is derived as follows:
For two closely spaced peaks, , and ,
so,
Where and are the retention times of two separate peaks.
Since , then
Using substitution, .
Now using the following equations and solving for and
Substituting again and you get:
And finally substituting once more and you get the Fundamental Resolution Equation:
References
[edit]- Spring 2009 Class Notes, CHM 5154, Chemical Separations taught by Dr. John Dorsey, Ph.D, Florida State University
- "Fundamental Resolution Equation". Chemistry LibreTexts. LibreTexts. 29 December 2016. Retrieved 1 December 2023.
- "Appendix 1: Derivation of the Fundamental Resolution Equation". Chemistry LibreTexts. LibreTexts. 30 December 2016. Retrieved 1 December 2023.